For five-heddle weave mesh in Pure Copper, the controlling selection factors are the media being filtered, the cleaning regime and the service temperature. The grade data for Pure Copper is summarized below together with every specification supplied.
Why Choose Pure Copper for Five-Heddle Weave Mesh
The EMI/RFI shielding and Faraday-cage mesh material. For five-heddle weave mesh, this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Five-Heddle Weave Mesh Available in Pure Copper
| Mesh (warp x weft) | Warp wire (mm) | Weft wire (mm) | Nominal filtration (u00b5m) | Weight SS (kg/mu00b2) | Reference standard |
|---|---|---|---|---|---|
| 30x360 | 0.25 | 0.16 | 80 | 1.15 | ISO 9044 |
| 40x560 | 0.18 | 0.12 | 60 | 0.90 | ISO 9044 |
| 80x720 | 0.10 | 0.07 | 32 | 0.55 | ISO 9044 |
