Welded Wire Mesh Rolls woven or fabricated in Brass (H65 / CuZn35) keeps its dimensional specification to EN 10223-7 / ASTM A740; the alloy determines corrosion behavior (good atmospheric and fresh-water resistance; unsuitable for ammonia service) and the service temperature limit (approx. +200 °C). Both are covered below with the full specification table.
Why Choose Brass for Welded Wire Mesh Rolls
The decorative and spark-resistant screening alloy. For welded wire mesh rolls, this matters when good atmospheric and fresh-water resistance; unsuitable for ammonia service is the controlling requirement.
Alloy Properties
| Grade designation | H65 / CuZn35 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric and fresh-water resistance; unsuitable for ammonia service |
Corrosion Behavior in Filtration Service
Copper and brass welded wire mesh rolls resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Welded Wire Mesh Rolls Available in Brass
| Opening (mm) | Wire diameter (mm) | Format | Standard size | Reference standard |
|---|---|---|---|---|
| 12.7x12.7 | 1.6 | Panel / roll | 1.0 x 2.0 m | EN 10223-7 |
| 25.4x25.4 | 2.0 | Panel / roll | 1.0 x 2.0 m | EN 10223-7 |
| 50.8x50.8 | 2.5 | Panel | 1.2 x 2.4 m | EN 10223-7 |
| 50x50 | 4.0 | Panel | 2.0 x 3.0 m | EN 10223-7 |