Brass sintered fiber felt is stocked to ISO 4022. The alloy provides good atmospheric and fresh-water resistance; unsuitable for ammonia service and is non-magnetic; the practical service limit is approx. +200 °C. Property data, alloy comparison and the specification table follow.
Why Choose Brass for Sintered Fiber Felt
The decorative and spark-resistant screening alloy. For sintered fiber felt, this matters when good atmospheric and fresh-water resistance; unsuitable for ammonia service is the controlling requirement.
Alloy Properties
| Grade designation | H65 / CuZn35 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric and fresh-water resistance; unsuitable for ammonia service |
Corrosion Behavior in Filtration Service
Copper and brass sintered fiber felt resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Sintered Fiber Felt Available in Brass
| Micron rating (u00b5m) | Thickness (mm) | Porosity (%) | Form | Reference standard |
|---|---|---|---|---|
| 3 | 0.35 | 75 | Sheet / cut disc | ISO 4022 |
| 5 | 0.40 | 78 | Sheet / cut disc | ISO 4022 |
| 10 | 0.45 | 80 | Sheet / cut disc | ISO 4022 |
| 20 | 0.55 | 82 | Sheet / cut disc | ISO 4022 |
| 40 | 0.60 | 83 | Sheet / cut disc | ISO 4022 |
| 60 | 0.70 | 85 | Sheet / cut disc | ISO 4022 |