Ultrasonic Vibrating Sieve Screen is used primarily for sieving fine and electrostatic powders on vibratory sifters with a stainless mesh screen driven by an ultrasonic transducer ring that stops blinding. This page lists the industries and assemblies where it is specified, the selection criteria that matter for each application, handling and installation practice, and the cases where a different mesh, screen or filter type is the correct choice. It is supplied to Sifter OEM frames / ISO 3310-1 cloth.
Typical Applications for Ultrasonic Vibrating Sieve Screen
Where Ultrasonic Vibrating Sieve Screen is specified and bought:
- Metal powders & additive manufacturing: sieving titanium, nickel and stainless powders at 15–60 µm.
- Battery materials: cathode and anode powder screening.
- Pharmaceutical & nutraceutical: fine API and excipient sieving.
- Pigments & toners: fine powder classification.
How to Specify Ultrasonic Vibrating Sieve Screen for Your Application
- Frame size: Match the sifter diameter (600–1500 mm).
- Mesh: 200–500 mesh; ultrasonic drive becomes essential below about 100 µm.
- Transducer & cable: Ring transducer frequency and generator compatibility.
- Standard: Quote Sifter OEM frames / ISO 3310-1 cloth and the size designation from the table on the product page, plus any value you changed in the technical drawing.
Handling & Installation Practice
- Keep the transducer ring bonded tight to the frame; a loose ring loses energy.
- Check mesh tension and transducer output each shift.
Common Selection Mistakes with Ultrasonic Vibrating Sieve Screen
- Running ultrasonics on slack cloth, which tears it.
- Mixing generator and transducer from different makers.
Where Ultrasonic Vibrating Sieve Screen Is Not the Right Choice
Not needed for coarse free-flowing products.
