Skip to content

Filter Elements · ASME B16.5 strainer bodies · Application guide

What Is Basket Strainer Replacement Basket Used For?

A tall stainless steel perforated basket strainer basket with fine mesh liner being lifted out of a simplex strainer body

Basket Strainer Replacement Basket is used primarily for replacing the perforated or mesh-lined basket inside permanent simplex and duplex basket strainers that protect pumps, heat exchangers and meters on pipelines. This page lists the industries and assemblies where it is specified, the selection criteria that matter for each application, handling and installation practice, and the cases where a different mesh, screen or filter type is the correct choice. It is supplied to ASME B16.5 strainer bodies.

Typical Applications for Basket Strainer Replacement Basket

Where Basket Strainer Replacement Basket is specified and bought:

  • Cooling & process water: basket strainers ahead of plate heat exchangers and chillers.
  • Oil & fuel terminals: transfer-line strainers in front of pumps and meters.
  • Chemical plants: pump suction protection on corrosive lines.
  • Marine & power: duplex strainers that are cleaned without stopping flow.

How to Specify Basket Strainer Replacement Basket for Your Application

  • Body size & make: Basket outside diameter and depth must match the strainer body exactly so nothing bypasses.
  • Perforation & liner: 3–4 mm perforation for strength, with a 20–40 mesh liner when finer straining is needed.
  • Open area ratio: 300–400 % of the pipe area keeps pressure drop low between cleanings.
  • Standard: Quote ASME B16.5 strainer bodies and the size designation from the table on the product page, plus any value you changed in the technical drawing.

Handling & Installation Practice

  • Clean when differential pressure rises; on duplex strainers switch baskets without stopping flow.
  • Replace the cover O-ring whenever the basket is removed.

Common Selection Mistakes with Basket Strainer Replacement Basket

  • Choosing too fine a liner for the dirt load, so the basket blinds within hours.
  • Fitting a shorter basket than the body needs, leaving a bypass gap at the bottom.

Where Basket Strainer Replacement Basket Is Not the Right Choice

Not a micron filter — use a cartridge or bag filter downstream when fine filtration is needed.

If This Construction Is Not the Right Fit

Closely related mesh types for the same duty — compare open area, aperture range and cleanability before you commit.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Set the size and options in the drawing above, then send the exact configuration straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ASME B16.5 strainer bodies)

SizeBasket diameter (mm)Depth (mm)Hole diameter (mm)Mesh linerOpen area ratio (%)
DN 50901603.040-Mesh400
DN 1001602803.040-Mesh400
DN 1502303804.020-Mesh350
DN 200 duplex2904704.0None300

Frequently Asked Questions

What is Basket Strainer Replacement Basket used for?

Replacing the perforated or mesh-lined basket inside permanent simplex and duplex basket strainers that protect pumps, heat exchangers and meters on pipelines.

Basket strainer or Y-strainer?

Basket strainers hold far more debris and suit larger, horizontal lines.

What open area ratio should a strainer basket have?

About 300–400 % of the pipe cross-section.

What is a duplex basket strainer?

Two baskets in one body, so one can be cleaned while the other stays in service.

Can I get a quote for Basket Strainer Replacement Basket to my own drawing?

Yes. Set the size and any custom value in the technical drawing on the product page and send it with the quote form; we reply within one business day.