Sintered Mesh · Sintered Porous Metal Elements

Sintered Porous Metal Filter Tube & Cartridge — ISO 4003 / ISO 4022 / ASTM E128

Name: Sintered Porous Metal Filter Tube & Cartridge
Brand: custommetalfilters.com
SKU: EHM-SIN-04
Price: 18 USD
Availability: InStock

Sintered Porous Metal Filter Tube & Cartridge for filtering gases, steam, solvents and process liquids through rigid sintered stainless powder tubes that can be back-flushed and reused for years. 5 sizes listed, with technical drawing and quotation.

Sintered Porous Metal Filter Tube & Cartridge (ISO 4003 / ISO 4022 / ASTM E128) — Sintered Porous Metal Elements

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quotation for Sintered Porous Metal Filter Tube & Cartridge

Tell us the specification (mesh count / micron / dimensions), material and quantity you need for Sintered Porous Metal Filter Tube & Cartridge (ISO 4003 / ISO 4022 / ASTM E128) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.

Category Type Standard Mesh count / micron Material Finish

Dimensions & Specifications (ISO 4003 / ISO 4022 / ASTM E128)

Every row below is a starting point for the customizer above — pick any specification row and the drawing will redraw to it.

Size	Outer diameter (mm)	Length (mm)	Micron rating (u00b5m)	Wall thickness (mm)	End fitting
u00d820 u00d7 50	20	50	5	2.0	Plain / welded cap
u00d830 u00d7 150	30	150	10	2.5	1/2 NPT male
u00d850 u00d7 250	50	250	20	3.0	DOE / 222 O-ring
u00d860 u00d7 500	60	500	40	3.0	Code 7 bayonet
u00d870 u00d7 1000	70	1000	60	3.5	Flanged

Sintered Porous Metal Filter Tube & Cartridge (ISO 4003 / ISO 4022 / ASTM E128) is used for filtering gases, steam, solvents and process liquids through rigid sintered stainless powder tubes that can be back-flushed and reused for years.

Also known as: sintered metal filter cartridge, sintered metal filter elements, sintered porous metal filter, sintered metal tube, porous stainless steel filter

Made by: Sintered Media (Diffusion Bonding) · Filter Fabrication & Assembly

Where Sintered Porous Metal Filter Tube & Cartridge Is Used

Chemical & petrochemical: catalyst recovery and solvent polishing filters.
Gas & steam: process gas, nitrogen and clean steam filtration.
Pharmaceutical & food: sterile vent and steam filters with welded fittings.
Semiconductor & instrumentation: gas line and sampling filters.

Read the full application guide for Sintered Porous Metal Filter Tube & Cartridge →

How to Specify Sintered Porous Metal Filter Tube & Cartridge

Micron rating: From 0.5 to 100 µm; specify liquid or gas rating, which differ for the same element.
Dimensions & wall: OD, length and wall thickness set flow and strength.
End fittings: Welded caps, NPT, DOE, 222/226 O-ring or flanged ends.

Materials

Standard supply is stainless steel 316/316L, Inconel 600; the material column in the table and the drawing options show the exact grade for each size. Other alloys and finishes can be quoted to your drawing.

Fitting & Care

Back-pulse or back-flush when differential pressure reaches the design limit.
Clean ultrasonically or by solvent, then verify bubble point.

Common Mistakes

Specifying a micron rating without the permeability or flow rate.
Over-tightening threaded ends, which cracks the porous body.

When Sintered Porous Metal Filter Tube & Cartridge Is Not the Right Choice

Not economical for high-volume, low-value water filtration where disposable cartridges are cheaper.

Related Mesh Products

Pricing

Sintered Porous Metal Filter Tube & Cartridge is made to order as finished parts. Indicative pricing starts from about US$18.00 per piece for a standard size at production quantity; the final price depends on size, material, finish, tooling and order volume. Send your configuration from the drawing above for a quotation.

Frequently Asked Questions

What is Sintered Porous Metal Filter Tube & Cartridge used for?

Filtering gases, steam, solvents and process liquids through rigid sintered stainless powder tubes that can be back-flushed and reused for years.

What is a sintered metal filter?

A filter made by fusing metal powder particles together into a rigid porous structure.

How is a sintered filter cleaned?

By back-flushing, ultrasonic cleaning or solvent cleaning; then integrity-tested.

What micron ratings are available for sintered tubes?

Typically 0.5–100 µm.

What is the specification range of Sintered Porous Metal Filter Tube & Cartridge?

The table on this page lists 5 standard specifications for Sintered Porous Metal Filter Tube & Cartridge, from u00d820 u00d7 50 to u00d870 u00d7 1000. Specifications outside the table — custom mesh counts, wire diameters, roll widths and fabricated pieces — can be quoted on request.

How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (specification, material, treatment) and click "Request this configuration" — a specialist from custommetalfilters.com will respond within one business day.