Microphone Pop Filter Metal Mesh Screen is used for breaking up the air blasts from P and B sounds in front of studio, podcast and streaming microphones with a thin perforated metal screen. Studio accessory is the reference cited for it on drawings, datasheets and purchase orders.
What Studio accessory Means for Microphone Pop Filter Metal Mesh Screen
The dimensions in the table below are supplied to suit Studio accessory. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Microphone Pop Filter Metal Mesh Screen Dimensions
| Size | Diameter (mm) | Hole diameter (mm) | Open area (%) | Profile | Finish |
|---|---|---|---|---|---|
| u00d8100 | 100 | 0.8 | 30 | Flat | Black powder coat |
| u00d8150 | 150 | 0.8 | 30 | Flat | Black powder coat |
| u00d8150 curved | 150 | 1.0 | 32 | Curved | Black powder coat |
Specifying Microphone Pop Filter Metal Mesh Screen Beyond the Standard
- Diameter: 100–150 mm to cover the capsule from normal head movement.
- Holes: 0.8–1.0 mm holes at about 30 % open area diffuse plosives without dulling treble.
- Profile: Flat, or curved to keep a consistent distance across the face.
When Microphone Pop Filter Metal Mesh Screen Is Not the Right Choice
Not a reflection filter or acoustic treatment for the room.
