Motorcycle & ATV Spark Arrester Screen is used for trapping glowing carbon particles inside motorcycle, ATV and dirt-bike silencers so they cannot ignite dry vegetation. SAE J350 is the reference cited for it on drawings, datasheets and purchase orders.
What SAE J350 Means for Motorcycle & ATV Spark Arrester Screen
The dimensions in the table below are supplied to suit SAE J350. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Motorcycle & ATV Spark Arrester Screen Dimensions
| Size | Outer diameter (mm) | Length (mm) | Hole diameter (mm) | Construction |
|---|---|---|---|---|
| Insert 38 | 38 | 90 | 0.6 | Perforated SS304 tube |
| Insert 45 | 45 | 110 | 0.6 | Perforated SS304 tube |
| Cone 50 | 50 | 75 | 0.6 | Woven 30-mesh cone |
Specifying Motorcycle & ATV Spark Arrester Screen Beyond the Standard
- Hole size: 0.6 mm (0.023 in) openings meet USDA Forest Service 5100-1.
- Fit: Match the silencer tip diameter and retaining screw pattern.
- Material: SS304 resists exhaust heat and corrosion.
When Motorcycle & ATV Spark Arrester Screen Is Not the Right Choice
Not a muffler; it does not reduce noise significantly.
