Performance Air Intake Filter Wire Cage is used for holding the pleated media of cone and cylinder intake filters in shape under engine suction with an epoxy-coated expanded steel cage. ISO 5011 assemblies is the reference cited for it on drawings, datasheets and purchase orders.
What ISO 5011 assemblies Means for Performance Air Intake Filter Wire Cage
The dimensions in the table below are supplied to suit ISO 5011 assemblies. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Performance Air Intake Filter Wire Cage Dimensions
| Size | Outer diameter (mm) | Length (mm) | Mesh | Inlet |
|---|---|---|---|---|
| Cone 76 | 130 | 180 | Epoxy-coated expanded 4 u00d7 2 | u00d8 76 flange |
| Cone 89 | 150 | 200 | Epoxy-coated expanded 4 u00d7 2 | u00d8 89 flange |
| Cylinder 102 | 160 | 230 | Epoxy-coated expanded 5 u00d7 2.5 | u00d8 102 flange |
Specifying Performance Air Intake Filter Wire Cage Beyond the Standard
- Flange diameter: Match the intake pipe (76, 89, 102 mm…).
- Mesh: Expanded steel 4 × 2 or 5 × 2.5 mm keeps pleats spaced.
- Coating: Epoxy powder coat resists heat and oil.
When Performance Air Intake Filter Wire Cage Is Not the Right Choice
Not a replacement for filter media; the cage alone filters nothing.
