Rotary Shaver Head Guard Cap is used for forming the slotted guard of rotary shaver heads, which lifts and guides hairs into the spinning cutter beneath. IEC 60335-2-8 is the reference cited for it on drawings, datasheets and purchase orders.
What IEC 60335-2-8 Means for Rotary Shaver Head Guard Cap
The dimensions in the table below are supplied to suit IEC 60335-2-8. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Rotary Shaver Head Guard Cap Dimensions
| Size | Diameter (mm) | Slot width (mm) | Slot count | Thickness (mm) | Material |
|---|---|---|---|---|---|
| Head 19 | 19 | 0.30 | 45 | 0.25 | SS420 hardened |
| Head 21 | 21 | 0.30 | 54 | 0.25 | SS420 hardened |
| Head 24 dual-track | 24 | 0.28 | 72 | 0.30 | SS420 hardened |
Specifying Rotary Shaver Head Guard Cap Beyond the Standard
- Diameter: Must match the cutter and head holder.
- Slot width: 0.28–0.30 mm balances closeness and skin comfort.
- Hardness: Hardened SS420 resists wear from the rotating cutter.
When Rotary Shaver Head Guard Cap Is Not the Right Choice
Not suitable for long beards without trimming first.
