Electric Shaver Foil Screen is used for forming the thin perforated foil that guides hairs to the oscillating cutter of foil shavers and trimmers. IEC 60335-2-8 is the reference cited for it on drawings, datasheets and purchase orders.
What IEC 60335-2-8 Means for Electric Shaver Foil Screen
The dimensions in the table below are supplied to suit IEC 60335-2-8. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Electric Shaver Foil Screen Dimensions
| Size | Foil width (mm) | Foil length (mm) | Thickness (mm) | Hole size (mm) | Hole pattern | Material |
|---|---|---|---|---|---|---|
| Single foil | 9 | 38 | 0.040 | 0.30 | Hex | Electroformed nickel |
| Twin foil | 10 | 40 | 0.045 | 0.30 | Hex + round | Electroformed nickel |
| Wide foil | 12 | 42 | 0.050 | 0.35 | Hex + slot | Electroformed Ni-Co |
| Trimmer foil | 6 | 30 | 0.040 | 0.25 | Hex | Electroformed nickel |
Specifying Electric Shaver Foil Screen Beyond the Standard
- Thickness: 0.04–0.05 mm sets closeness; thinner is closer but less durable.
- Hole pattern: Hex for short stubble, slot and round holes for longer hairs.
- Material: Electroformed nickel or nickel-cobalt for hardness and precise holes.
When Electric Shaver Foil Screen Is Not the Right Choice
Not suitable for long hair without a trimmer; foils only accept short stubble.
