Pulper Finisher Screen is used for separating smooth pulp and juice from seeds, skins and fibers in tomato and fruit pulper-finishers, where rotating paddles force product through a cylindrical perforated screen. EU 1935 is the reference cited for it on drawings, datasheets and purchase orders.
What EU 1935 Means for Pulper Finisher Screen
The dimensions in the table below are supplied to suit EU 1935. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Pulper Finisher Screen Dimensions
| Size | Outer diameter (mm) | Length (mm) | Hole diameter (mm) | Open area (%) | Product |
|---|---|---|---|---|---|
| Pulper 1.5 | 300 | 900 | 1.5 | 28 | Tomato pulping |
| Finisher 0.8 | 300 | 900 | 0.8 | 22 | Tomato finishing |
| Finisher 0.5 | 400 | 1200 | 0.5 | 18 | Fruit puru00e9e |
| Citrus 0.6 | 250 | 800 | 0.6 | 20 | Citrus juice finishing |
Specifying Pulper Finisher Screen Beyond the Standard
- Hole size by stage: 1.2–1.5 mm on the pulper, 0.5–0.8 mm on the finisher.
- Screen size: Diameter and length must match the machine and paddle rotor.
- Alloy: SS316 for acidic tomato and fruit products.
When Pulper Finisher Screen Is Not the Right Choice
Not a juice clarifier; centrifuges or filters remove fine solids afterwards.
