Industrial Wire Mesh Basket is used for holding machined, stamped and cast parts through washing, degreasing, heat treatment, dip coating and storage in welded wire or expanded metal baskets built to the line. 1 tray grid) is the reference cited for it on drawings, datasheets and purchase orders.
What 1 tray grid) Means for Industrial Wire Mesh Basket
The dimensions in the table below are supplied to suit 1 tray grid). Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Industrial Wire Mesh Basket Dimensions
| Size | Length (mm) | Width (mm) | Height (mm) | Mesh opening (mm) | Wire diameter (mm) |
|---|---|---|---|---|---|
| Parts washing 600 | 600 | 400 | 200 | 6 | 1.6 |
| Heat treat 500 | 500 | 500 | 300 | 12 | 3.0 |
| Ultrasonic 300 | 300 | 200 | 100 | 3 | 1.0 |
| Expanded metal 600 | 600 | 400 | 150 | 10 | 1.5 |
| Dip / coating 400 | 400 | 300 | 250 | 8 | 2.0 |
Specifying Industrial Wire Mesh Basket Beyond the Standard
- Size & load: Give inner dimensions, stacking height and maximum payload at operating temperature.
- Mesh & wire: Opening smaller than the smallest part; heavier wire and frame rods for furnace work.
- Alloy: SS304 for washing to 800 °C; 310S or Inconel 600 for furnaces above 900 °C.
When Industrial Wire Mesh Basket Is Not the Right Choice
Not a medical sterilization basket — those need electropolished DIN-size trays.
