Skip to content

Woven Wire Mesh · ASTM E2016 / ISO 9044

60 Mesh Aluminum Wire Mesh Specifications

A roll of silver woven aluminum wire mesh partly unrolled on a workbench, light reflecting off the fine square weave

60 mesh denotes 60 wires per inch in each direction. For aluminum wire mesh the governing document is ASTM E2016 / ISO 9044; the specification row, aperture-micron conversion and selection guidance for this count follow.

60 Mesh Specification Row (ASTM E2016 / ISO 9044)

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Alloy
60-Mesh0.1200.30330351.3Aluminum 5052

60 Mesh to Micron & Aperture

Openings per inch60
Aperture (opening width)0.23 mm
Micron rating233 µm
Standard wire diameter0.19 mm
Open area30.4 %

Aperture = (25.4 mm ÷ mesh count) − wire diameter. The micron rating equals the aperture in micrometres; actual retention also depends on particle shape and cake formation.

Wire Diameter Options at 60 Mesh

OptionWire diaApertureMicronOpen areaWeight (SS)
Heavy wire0.247 mm0.176 mm176 µm17.4 %1.88 kg/m²
Standard wire0.190 mm0.233 mm233 µm30.4 %1.12 kg/m²
Fine wire0.143 mm0.281 mm281 µm44.0 %0.63 kg/m²

Heavier wire adds strength and abrasion life but closes the aperture; finer wire opens the aperture and raises throughput at the cost of durability. Specify mesh count AND wire diameter to fix the aperture unambiguously.

Open Area & Flow at 60 Mesh

The standard 60 mesh weave presents an open area of about 30.4%. At this count the mesh presents little flow resistance; selection is normally driven by particle retention and mechanical strength rather than pressure drop.

60 Mesh Cloth Weight

Standard 60 mesh stainless cloth weighs approximately 1.12 kg/m² (density 7.93 g/cm³ basis; brass and copper weave roughly 10% heavier, aluminum about one third). Use this figure for roll handling and freight estimation.

Typical Applications for 60 Mesh Aluminum Wire Mesh

60 mesh aluminum wire mesh is commonly specified for general straining and sieving, paint and coating filtration, grease filters, insect screening, grain cleaning and pre-filtration ahead of fine media.

Plain, Twill or Dutch Weave at This Rating?

Plain square weave is the standard at this count: every opening is a true square of the stated aperture, retention is absolute for hard spherical particles, and the cloth is easy to clean.

What Aluminum Wire Mesh Does

Screening, filtering and shielding where weight and cost matter more than strength, using woven aluminum cloth that is a third the weight of steel and does not rust.

Fitting & Care

  • Frame or hem cut edges; aluminum wire is soft and frays if left raw.
  • Isolate aluminum mesh from copper and brass parts in damp service to prevent galvanic corrosion.
Mesh count to micron conversion chart
Mesh count to aperture and micron rating. Confirm the exact figure against the specification table below — wire diameter, not mesh count alone, sets the aperture.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ASTM E2016 / ISO 9044)

Mesh countWire diameter (mm)Aperture (mm)Micron rating (u00b5m)Open area (%)Alloy
14-Mesh0.2801.534153471.5Aluminum 5154 / 5056
18-Mesh0.2801.131113164.0Aluminum 5154 / 5056
30-Mesh0.1800.66766762.0Aluminum 5052
40-Mesh0.1800.45545551.0Aluminum 5052
60-Mesh0.1200.30330351.3Aluminum 5052

Frequently Asked Questions

Is aluminum wire mesh rust-proof?

Yes — aluminum does not rust; it forms a thin protective oxide layer.

Aluminum or stainless steel mesh?

Aluminum is lighter and cheaper; stainless is stronger, more heat-resistant and survives harsher cleaning.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.