Wedge Wire Screen Tubes woven or fabricated in 316L Stainless Steel (AISI 316L (1.4404)) keeps its dimensional specification to Industry standard (V-wire); the alloy determines corrosion behavior (superior resistance, including chlorides, brines, food CIP and mild acids) and the service temperature limit (approx. +550 °C continuous). Both are covered below with the full specification table.
Why Choose 316L Stainless Steel for Wedge Wire Screen Tubes
The default filtration and process-industry grade. For wedge wire screen tubes, this matters when superior resistance, including chlorides, brines, food CIP and mild acids is the controlling requirement.
Alloy Properties
| Grade designation | AISI 316L (1.4404) |
|---|---|
| Magnetic response | Essentially non-magnetic |
| Service temperature | approx. +550 °C continuous |
| Corrosion characteristic | Superior resistance, including chlorides, brines, food CIP and mild acids |
Corrosion Behavior in Filtration Service
316/316L adds 2–3% molybdenum to the 304 composition, which sharply improves resistance to chloride pitting and mild acids. For wedge wire screen tubes in marine, brine, food-CIP and chemical-process service, 316L is the default filtration grade; the L (low-carbon) variant also resists sensitization where elements are welded into frames.
Comparable Alloys
Below 316L sits 304 (general purpose, lower cost). Above it: duplex 2205 (strength + chloride resistance), 904L and Hastelloy C-276 (hot chlorides, sulfuric), Monel 400 (HF, seawater), titanium (chlorides at minimum weight) for wedge wire screen tubes.
Specifications of Wedge Wire Screen Tubes Available in 316L Stainless Steel
| Slot opening (mm) | Wire profile (mm) | Support rod (mm) | Open area (%) | Tolerance |
|---|---|---|---|---|
| 0.05 | V-profile 1.5 x 2.5 | Rod 3 x 5 | 8 | Slot tolerance u00b10.02 |
| 0.10 | V-profile 1.5 x 2.5 | Rod 3 x 5 | 12 | Slot tolerance u00b10.02 |
| 0.25 | V-profile 2.2 x 3.0 | Rod 3 x 5 | 18 | Slot tolerance u00b10.03 |
| 0.50 | V-profile 2.2 x 3.0 | Rod 3 x 5 | 25 | Slot tolerance u00b10.05 |
| 1.00 | V-profile 3.0 x 5.0 | Rod 5 x 8 | 33 | Slot tolerance u00b10.05 |