Skip to content

Home, HVAC & Safety Mesh · ASHRAE 52.2 MERV 1–4

304 Stainless Steel Washable Aluminum Mesh HVAC Air Filter

A rectangular washable aluminum mesh HVAC air filter with silver frame and visible layered expanded mesh, being rinsed

Washable Aluminum Mesh HVAC Air Filter in 304 Stainless Steel (AISI 304 (1.4301)) is used for pre-filtering coarse dust, lint and grease from HVAC return air with a rigid aluminum mesh pad that is washed and reused instead of thrown away. The alloy gives good general corrosion resistance in atmosphere and fresh water and is essentially non-magnetic (annealed), with a practical service limit of approx. +450 °C continuous.

Alloy Properties

Grade designationAISI 304 (1.4301)
Magnetic responseEssentially non-magnetic (annealed)
Service temperatureapprox. +450 °C continuous
Corrosion characteristicGood general corrosion resistance in atmosphere and fresh water

Specifications of Washable Aluminum Mesh HVAC Air Filter Available in 304 Stainless Steel

SizeWidth X (mm)Height Y (mm)Thickness (mm)LayersEfficiency
16 u00d7 20 u00d7 1 in406508256 expanded aluminumMERV 2
20 u00d7 25 u00d7 1 in508635256 expanded aluminumMERV 2
24 u00d7 24 u00d7 2 in6106105010 expanded + 1 wovenMERV 4

Where 304 Stainless Steel Washable Aluminum Mesh HVAC Air Filter Is Used

  • HVAC contractors: permanent return-grille filters for residential furnaces and air handlers.
  • Commercial kitchens & bakeries: make-up air pre-filters that catch flour dust and grease aerosol.
  • Industrial ventilation: first-stage filters ahead of pleated or bag filters to extend their life.
  • RV & marine: washable filters where replacements are hard to source on the road or at sea.

Ordering Washable Aluminum Mesh HVAC Air Filter in 304 Stainless Steel

  • Nominal vs actual size: Order to the actual frame size; a 16 × 20 × 1 in filter usually measures about 15.5 × 19.5 × 0.75 in.
  • Layer build: More expanded layers plus a woven face raise efficiency to MERV 4 but also raise initial pressure drop.
  • Frame: Aluminum channel with corner reinforcement keeps the pad square through repeated washing.

Mistakes to Avoid with Washable Aluminum Mesh HVAC Air Filter

  • Expecting MERV 8–13 performance — aluminum mesh is a coarse pre-filter, not an allergen filter.
  • Re-installing a wet filter, which promotes mold growth on the coil.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ASHRAE 52.2 MERV 1–4)

SizeWidth X (mm)Height Y (mm)Thickness (mm)LayersEfficiency
16 u00d7 20 u00d7 1 in406508256 expanded aluminumMERV 2
20 u00d7 25 u00d7 1 in508635256 expanded aluminumMERV 2
24 u00d7 24 u00d7 2 in6106105010 expanded + 1 wovenMERV 4

Frequently Asked Questions

How often should a washable HVAC filter be cleaned?

Every one to three months, or more often with pets or construction dust. Rinse from the clean side and dry completely.

What MERV rating is an aluminum mesh filter?

Typically MERV 1–4, depending on how many layers and whether a woven face layer is included.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.