Air Fryer Basket Mesh Insert in 304 Stainless Steel (AISI 304 (1.4301)) is used for giving air-fryer baskets a coating-free stainless cooking surface that lets hot air circulate under the food. The alloy gives good general corrosion resistance in atmosphere and fresh water and is essentially non-magnetic (annealed), with a practical service limit of approx. +450 °C continuous.
Alloy Properties
| Grade designation | AISI 304 (1.4301) |
|---|
| Magnetic response | Essentially non-magnetic (annealed) |
|---|
| Service temperature | approx. +450 °C continuous |
|---|
| Corrosion characteristic | Good general corrosion resistance in atmosphere and fresh water |
|---|
Specifications of Air Fryer Basket Mesh Insert Available in 304 Stainless Steel
| Size | Top diameter (mm) | Depth (mm) | Hole diameter (mm) | Construction |
|---|
| 3.5 qt | 190 | 75 | 2.5 | Woven 8-Mesh, PTFE-free |
| 5.8 qt | 220 | 85 | 2.5 | Woven 8-Mesh, PTFE-free |
| Square 8 qt | 230 | 90 | 3.0 | Perforated SS304 |
Where 304 Stainless Steel Air Fryer Basket Mesh Insert Is Used
- Small-appliance OEMs: stainless baskets as an alternative to nonstick coatings.
- Accessory brands: drop-in liners and racks.
- Commercial snack kitchens: ventless fryer baskets.
- Health-focused retailers: PTFE-free cookware lines.
Ordering Air Fryer Basket Mesh Insert in 304 Stainless Steel
- Fit: Match diameter or square size and depth to the drawer.
- Opening: 2.5–3 mm holds fries and nuggets while airflow stays high.
- Construction: Woven mesh crisps evenly; perforated sheet is easier to clean.
Mistakes to Avoid with Air Fryer Basket Mesh Insert
- Overfilling, which blocks airflow and steams the food.
- Using a fine mesh that traps crumbs and smokes.
