Micro Expanded Metal Mesh woven or fabricated in Monel 400 (UNS N04400 (2.4360)) keeps its dimensional specification to DIN 791; the alloy determines corrosion behavior (excellent resistance to seawater, hydrofluoric acid and alkalis) and the service temperature limit (approx. +540 °C). Both are covered below with the full specification table.
Why Choose Monel 400 for Micro Expanded Metal Mesh
The marine and chemical-processing specialist alloy. For micro expanded metal mesh, this matters when excellent resistance to seawater, hydrofluoric acid and alkalis is the controlling requirement.
Alloy Properties
| Grade designation | UNS N04400 (2.4360) |
|---|---|
| Magnetic response | Slightly magnetic |
| Service temperature | approx. +540 °C |
| Corrosion characteristic | Excellent resistance to seawater, hydrofluoric acid and alkalis |
Cleaning & Compatibility
Special alloys tolerate aggressive cleaning chemistry, but confirm the specific acid/alkali against the alloy datasheet — e.g. Monel handles HF but not oxidizing nitric; titanium handles nitric but not HF. When welding elements into frames, use matching filler and inert-gas backing to preserve corrosion resistance at the joint.
Comparable Alloys
Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.
Specifications of Micro Expanded Metal Mesh Available in Monel 400
| Mesh designation (SWD x LWD) | SWD (mm) | LWD (mm) | Strand width (mm) | Strand thickness (mm) | Open area (%) |
|---|---|---|---|---|---|
| 1.0x2.0 | 1.0 | 2.0 | 0.3 | 0.3 | 45 |
| 1.5x3.0 | 1.5 | 3.0 | 0.4 | 0.3 | 50 |
| 2.0x4.0 | 2.0 | 4.0 | 0.5 | 0.4 | 52 |
| 3.0x6.0 | 3.0 | 6.0 | 0.6 | 0.5 | 55 |
