Temporary Cone & Basket Strainers woven or fabricated in Monel 400 (UNS N04400 (2.4360)) keeps its dimensional specification to ASME B16.5 fit; the alloy determines corrosion behavior (excellent resistance to seawater, hydrofluoric acid and alkalis) and the service temperature limit (approx. +540 °C). Both are covered below with the full specification table.
Why Choose Monel 400 for Temporary Cone & Basket Strainers
The marine and chemical-processing specialist alloy. For temporary cone & basket strainers, this matters when excellent resistance to seawater, hydrofluoric acid and alkalis is the controlling requirement.
Alloy Properties
| Grade designation | UNS N04400 (2.4360) |
|---|---|
| Magnetic response | Slightly magnetic |
| Service temperature | approx. +540 °C |
| Corrosion characteristic | Excellent resistance to seawater, hydrofluoric acid and alkalis |
Cleaning & Compatibility
Special alloys tolerate aggressive cleaning chemistry, but confirm the specific acid/alkali against the alloy datasheet — e.g. Monel handles HF but not oxidizing nitric; titanium handles nitric but not HF. When welding elements into frames, use matching filler and inert-gas backing to preserve corrosion resistance at the joint.
Comparable Alloys
Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.
Specifications of Temporary Cone & Basket Strainers Available in Monel 400
| Nominal pipe size | Screen mesh | Open area ratio | Style | Reference standard |
|---|---|---|---|---|
| DN25 (1 in) | 20-Mesh to 100-Mesh | >150% | Cone / basket / truncated | ASME B16.5 flange fit |
| DN50 (2 in) | 20-Mesh to 100-Mesh | >150% | Cone / basket / truncated | ASME B16.5 flange fit |
| DN80 (3 in) | 20-Mesh to 100-Mesh | >150% | Cone / basket / truncated | ASME B16.5 flange fit |
| DN100 (4 in) | 20-Mesh to 100-Mesh | >200% | Cone / basket / truncated | ASME B16.5 flange fit |
| DN150 (6 in) | 20-Mesh to 100-Mesh | >200% | Cone / basket / truncated | ASME B16.5 flange fit |
| DN200 (8 in) | 10-Mesh to 60-Mesh | >200% | Cone / basket | ASME B16.5 flange fit |