Pure Copper wedge wire screen tubes is stocked to Industry standard (V-wire). The alloy provides good atmospheric resistance with a stable patina; outstanding conductivity and is non-magnetic; the practical service limit is approx. +200 °C. Property data, alloy comparison and the specification table follow.
Why Choose Pure Copper for Wedge Wire Screen Tubes
The EMI/RFI shielding and Faraday-cage mesh material. For wedge wire screen tubes, this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Corrosion Behavior in Filtration Service
Copper and brass wedge wire screen tubes resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Comparable Alloys
Within the copper family: brass for economy and appearance, phosphor bronze for fatigue strength and marine air, pure copper where conductivity (EMI shielding) is the point. For structural filtration duties, stainless 304/316 is the usual alternative.
Specifications of Wedge Wire Screen Tubes Available in Pure Copper
| Slot opening (mm) | Wire profile (mm) | Support rod (mm) | Open area (%) | Tolerance |
|---|---|---|---|---|
| 0.05 | V-profile 1.5 x 2.5 | Rod 3 x 5 | 8 | Slot tolerance u00b10.02 |
| 0.10 | V-profile 1.5 x 2.5 | Rod 3 x 5 | 12 | Slot tolerance u00b10.02 |
| 0.25 | V-profile 2.2 x 3.0 | Rod 3 x 5 | 18 | Slot tolerance u00b10.03 |
| 0.50 | V-profile 2.2 x 3.0 | Rod 3 x 5 | 25 | Slot tolerance u00b10.05 |
| 1.00 | V-profile 3.0 x 5.0 | Rod 5 x 8 | 33 | Slot tolerance u00b10.05 |
