Pure Copper reverse dutch weave mesh is stocked to ISO 9044. The alloy provides good atmospheric resistance with a stable patina; outstanding conductivity and is non-magnetic; the practical service limit is approx. +200 °C. Property data, alloy comparison and the specification table follow.
Why Choose Pure Copper for Reverse Dutch Weave Mesh
The EMI/RFI shielding and Faraday-cage mesh material. For reverse dutch weave mesh, this matters when good atmospheric resistance with a stable patina; outstanding conductivity is the controlling requirement.
Alloy Properties
| Grade designation | C11000 |
|---|---|
| Magnetic response | Non-magnetic |
| Service temperature | approx. +200 °C |
| Corrosion characteristic | Good atmospheric resistance with a stable patina; outstanding conductivity |
Corrosion Behavior in Filtration Service
Copper and brass reverse dutch weave mesh resist atmospheric corrosion and fresh water well, tarnishing to a stable patina. Avoid ammonia and ammonium compounds (stress-corrosion cracking of brass) and strong oxidizing acids. In marine service, phosphor bronze outperforms plain brass.
Cleaning & Compatibility
Clean copper-alloy mesh with mild detergent or dilute citric acid; avoid ammonia-based cleaners entirely. In contact with more noble metals in wet service the copper alloy becomes the sacrificial partner — isolate or accept the loss rate.
Specifications of Reverse Dutch Weave Mesh Available in Pure Copper
| Mesh (warp x weft) | Warp wire (mm) | Weft wire (mm) | Nominal filtration (u00b5m) | Weight SS (kg/mu00b2) | Reference standard |
|---|---|---|---|---|---|
| 48x10 | 0.55 | 1.00 | 700 | 5.20 | ISO 9044 |
| 72x15 | 0.45 | 0.85 | 400 | 4.10 | ISO 9044 |
| 132x17 | 0.28 | 0.63 | 250 | 2.90 | ISO 9044 |
| 152x24 | 0.22 | 0.46 | 180 | 2.10 | ISO 9044 |
| 175x50 | 0.14 | 0.28 | 95 | 1.30 | ISO 9044 |
