Paint Strainer & Spray Gun Filter Screen is used for straining paint, coatings and inks at the spray gun, pump inlet and cup so lumps, skins and grit do not block tips and spoil the finish. Spray equipment fittings is the reference cited for it on drawings, datasheets and purchase orders.
What Spray equipment fittings Means for Paint Strainer & Spray Gun Filter Screen
The dimensions in the table below are supplied to suit Spray equipment fittings. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Paint Strainer & Spray Gun Filter Screen Dimensions
| Size | Top diameter (mm) | Depth (mm) | Mesh | Micron rating (u00b5m) | Use |
|---|---|---|---|---|---|
| Gun cup 25 | 25 | 30 | 100-Mesh | 154 | HVLP cup inlet |
| Airless 30 | 12 | 60 | 60-Mesh | 233 | Airless gun handle |
| Pump inlet 60 | 60 | 90 | 30-Mesh | 547 | Paint pump suction |
Specifying Paint Strainer & Spray Gun Filter Screen Beyond the Standard
- Mesh by material: 100-mesh for clear coats and base coats; 60-mesh for primers and latex; 30-mesh at pump inlets.
- Fit: Cup inlet, gun handle or pump suction format.
- Material: Stainless steel survives solvent cleaning that destroys nylon.
When Paint Strainer & Spray Gun Filter Screen Is Not the Right Choice
Not a substitute for straining paint into the cup through a disposable cone strainer when the coating is lumpy.
