Vacuum Cleaner Cyclone Metal Mesh Filter is used for separating hair, lint and coarse dust around the cyclone of bagless stick, canister and robot vacuums with a fine metal mesh shroud that protects the motor filter. IEC 60312-1 is the reference cited for it on drawings, datasheets and purchase orders.
What IEC 60312-1 Means for Vacuum Cleaner Cyclone Metal Mesh Filter
The dimensions in the table below are supplied to suit IEC 60312-1. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Vacuum Cleaner Cyclone Metal Mesh Filter Dimensions
| Size | Outer diameter (mm) | Length (mm) | Hole diameter (mm) | Open area (%) | Construction |
|---|---|---|---|---|---|
| Stick vac shroud | 42 | 60 | 0.40 | 28 | Etched SS304 sleeve |
| Canister shroud | 65 | 95 | 0.50 | 30 | Perforated SS304 + mesh |
| Robot vac | 30 | 40 | 0.30 | 25 | Woven 80-mesh SS304 |
Specifying Vacuum Cleaner Cyclone Metal Mesh Filter Beyond the Standard
- Size: Match the cyclone diameter and length.
- Holes: 0.3–0.5 mm, etched or perforated.
- Open area: 25–30 % to keep suction high.
When Vacuum Cleaner Cyclone Metal Mesh Filter Is Not the Right Choice
Not a HEPA or motor filter — those stay downstream of the shroud.
