Filter Bag Cage is used for holding filter bags open in pulse-jet baghouse dust collectors with welded wire cages of vertical wires and support rings. Custom to baghouse drawing is the reference cited for it on drawings, datasheets and purchase orders.
What Custom to baghouse drawing Means for Filter Bag Cage
The dimensions in the table below are supplied to suit Custom to baghouse drawing. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Filter Bag Cage Dimensions
| Size | Outer diameter (mm) | Length (mm) | Vertical wires | Ring spacing (mm) | Finish |
|---|---|---|---|---|---|
| u00d8120 u00d7 2000 | 120 | 2000 | 10 | 200 | Galvanized |
| u00d8130 u00d7 3000 | 130 | 3000 | 12 | 200 | Silicone-coated |
| u00d8150 u00d7 6000 split | 150 | 6000 | 16 | 150 | SS304 |
Specifying Filter Bag Cage Beyond the Standard
- Diameter & length: Match the bag; long cages split into sections with joints.
- Wire count & ring spacing: More wires and closer rings support the bag and extend its life.
- Finish: Galvanized, silicone- or epoxy-coated, or stainless for corrosive or hot gas.
When Filter Bag Cage Is Not the Right Choice
Not for cartridge collectors, which use cartridge support cores.
