Brewery Lauter Tun False Bottom is used for separating sweet wort from the grain bed in brewery lauter tuns and mash filters with wedge wire false-bottom plates. brewery OEM drawing is the reference cited for it on drawings, datasheets and purchase orders.
What brewery OEM drawing Means for Brewery Lauter Tun False Bottom
The dimensions in the table below are supplied to suit brewery OEM drawing. Where the standard sets requirements for the finished appliance, device or system, compliance testing of that assembly stays with its manufacturer; we supply the metal mesh part to the drawing and can provide material certificates and dimensional reports with the shipment.
Brewery Lauter Tun False Bottom Dimensions
| Size | Slot opening (mm) | Wire profile (mm) | Open area (%) | Vessel (bbl) |
|---|---|---|---|---|
| 7 bbl | 0.7 | 2.5 u00d7 4.0 | 11 | 7 |
| 15 bbl | 0.7 | 2.5 u00d7 4.0 | 11 | 15 |
| 30 bbl | 0.8 | 3.0 u00d7 5.0 | 12 | 30 |
Specifying Brewery Lauter Tun False Bottom Beyond the Standard
- Slot width: 0.7–0.8 mm keeps husks back while wort runs clear.
- Open area: 10–12 % for fast, stable run-off.
- Segments: Pie-shaped segments sized to fit through the manway.
When Brewery Lauter Tun False Bottom Is Not the Right Choice
Not a mash filter press cloth; high-gravity mash filters use a different technology.
