Pump Foot Valve & Suction Strainer in 316L Stainless Steel (AISI 316L (1.4404)) is used for keeping stones, leaves and debris out of pump suction lines at the inlet end, often combined with a foot valve that holds the prime. The alloy gives superior resistance, including chlorides, brines, food CIP and mild acids and is essentially non-magnetic, with a practical service limit of approx. +550 °C continuous.
Alloy Properties
| Grade designation | AISI 316L (1.4404) |
|---|
| Magnetic response | Essentially non-magnetic |
|---|
| Service temperature | approx. +550 °C continuous |
|---|
| Corrosion characteristic | Superior resistance, including chlorides, brines, food CIP and mild acids |
|---|
Specifications of Pump Foot Valve & Suction Strainer Available in 316L Stainless Steel
| Size | Basket diameter (mm) | Depth (mm) | Hole diameter (mm) | Open area ratio (%) |
|---|
| 1 in | 60 | 70 | 4.0 | 300 |
| 2 in | 95 | 110 | 5.0 | 300 |
| 3 in | 135 | 150 | 6.0 | 250 |
| 4 in | 170 | 190 | 6.0 | 250 |
Where 316L Stainless Steel Pump Foot Valve & Suction Strainer Is Used
- Irrigation & agriculture: pond, river and tank suction.
- Fire & dewatering pumps: suction strainers.
- Wells: foot valve strainers.
- Marine & industrial: tank suction lines.
Ordering Pump Foot Valve & Suction Strainer in 316L Stainless Steel
- Pipe size: 1–4 in thread or flange.
- Open area: At least 3× the pipe area to avoid cavitation.
- Holes: 4–6 mm perforation to stop stones and debris.
Mistakes to Avoid with Pump Foot Valve & Suction Strainer
- Undersized strainer causing cavitation.
- Lying the strainer in mud.
