Photo-Etched Mesh Sheet in 316L Stainless Steel (AISI 316L (1.4404)) is used for supplying burr-free, flat filter and screen sheet with micro-holes from 0.05 mm, made by photo-chemical etching of thin stainless, nickel or copper foil. The alloy gives superior resistance, including chlorides, brines, food CIP and mild acids and is essentially non-magnetic, with a practical service limit of approx. +550 °C continuous.
Alloy Properties
| Grade designation | AISI 316L (1.4404) |
|---|
| Magnetic response | Essentially non-magnetic |
|---|
| Service temperature | approx. +550 °C continuous |
|---|
| Corrosion characteristic | Superior resistance, including chlorides, brines, food CIP and mild acids |
|---|
Specifications of Photo-Etched Mesh Sheet Available in 316L Stainless Steel
| Size | Hole diameter (mm) | Pitch (mm) | Thickness (mm) | Open area (%) | Sheet (mm) |
|---|
| u00d80.05 / P0.10 | 0.05 | 0.10 | 0.05 | 22.7 | 300 u00d7 300 |
| u00d80.10 / P0.18 | 0.10 | 0.18 | 0.10 | 28.0 | 300 u00d7 400 |
| u00d80.20 / P0.30 | 0.20 | 0.30 | 0.15 | 40.3 | 400 u00d7 500 |
| u00d80.40 / P0.60 | 0.40 | 0.60 | 0.30 | 40.3 | 500 u00d7 600 |
Where 316L Stainless Steel Photo-Etched Mesh Sheet Is Used
- Filter manufacturers: sheet stock for cutting and forming filter parts.
- Medical & laboratory: flat micro-perforated sieves and supports.
- Acoustics & electronics: speaker meshes, vents and EMI windows.
- Prototyping: test sheets before tooling a punched part.
Ordering Photo-Etched Mesh Sheet in 316L Stainless Steel
- Hole and pitch: Holes from 0.05 mm, roughly equal to or larger than the foil thickness.
- Foil: 0.05–0.3 mm SS304/316L, nickel, copper or titanium.
- Sheet size & margins: Up to about 500 × 600 mm with solid borders for handling.
Mistakes to Avoid with Photo-Etched Mesh Sheet
- Requesting holes smaller than the foil thickness.
- Expecting woven-mesh open area from very fine etched holes.
