Skip to content

Filter Elements · ISO 2941 / ISO 16889 beta-rated

Inconel 600 Pleated Filter Cartridges

Pleated Filter Cartridges woven or fabricated in Inconel 600 (UNS N06600 (2.4816)) keeps its dimensional specification to ISO 2941 / ISO 16889 beta-rated; the alloy determines corrosion behavior (excellent oxidation resistance at extreme temperature) and the service temperature limit (approx. +1000 °C (short excursions higher)). Both are covered below with the full specification table.

Why Choose Inconel 600 for Pleated Filter Cartridges

The high-temperature furnace and hot-gas filtration alloy. For pleated filter cartridges, this matters when excellent oxidation resistance at extreme temperature is the controlling requirement.

Alloy Properties

Grade designationUNS N06600 (2.4816)
Magnetic responseEssentially non-magnetic
Service temperatureapprox. +1000 °C (short excursions higher)
Corrosion characteristicExcellent oxidation resistance at extreme temperature

Cleaning & Compatibility

Special alloys tolerate aggressive cleaning chemistry, but confirm the specific acid/alkali against the alloy datasheet — e.g. Monel handles HF but not oxidizing nitric; titanium handles nitric but not HF. When welding elements into frames, use matching filler and inert-gas backing to preserve corrosion resistance at the joint.

Comparable Alloys

Between the special alloys, selection is chemistry-led: Monel 400 (HF, seawater), Inconel 600 (heat/oxidation), Hastelloy C-276 (broadest acid resistance), nickel 200 (caustic), titanium (chlorides, weight). 316L remains the cost benchmark — specify a special alloy only when the datasheet chemistry demands it.

Specifications of Pleated Filter Cartridges Available in Inconel 600

Outer diameter (mm)Length (mm)Micron rating (u00b5m)End connectionReference standard
652501 / 5 / 10 / 25DOE / 222 / 226Pleated 5x area
655001 / 5 / 10 / 25DOE / 222 / 226Pleated 5x area
657501 / 5 / 10 / 25DOE / 222 / 226Pleated 5x area
835001 / 5 / 10 / 25226 bayonetPleated 5x area

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 2941 / ISO 16889 beta-rated)

Outer diameter (mm)Length (mm)Micron rating (u00b5m)End connectionReference standard
652501 / 5 / 10 / 25DOE / 222 / 226Pleated 5x area
655001 / 5 / 10 / 25DOE / 222 / 226Pleated 5x area
657501 / 5 / 10 / 25DOE / 222 / 226Pleated 5x area
835001 / 5 / 10 / 25226 bayonetPleated 5x area

Frequently Asked Questions

What corrosion resistance does Inconel 600 offer?

Inconel 600 provides excellent oxidation resistance at extreme temperature, with a practical service range of approx. +1000 °C (short excursions higher).

What temperature can Inconel 600 pleated filter cartridges run at?

The practical continuous service limit is approx. +1000 °C (short excursions higher). Above it, oxidation scales the wire surface and the aperture drifts; for hotter duty move up the alloy ladder (Inconel, and sintered constructions for mechanical stability).

When is Inconel 600 worth the premium over stainless?

Specify Inconel 600 when the datasheet chemistry rules stainless out — excellent oxidation resistance at extreme temperature. For everything else, 316L is usually the economic choice.

Can Inconel 600 pleated filter cartridges be welded into frames?

Yes — spot, TIG and plasma welding are standard for framing and edging. Use matching filler, keep heat input low to protect the fine wires, and re-passivate stainless after fabrication.

How do I request a quotation?

Use the technical drawing on this page to pick the exact specification, then submit it with the quote form. We respond within one business day.